1. Site Orientation/ Induction
   1. Undertake a site induction
2. Claim work area
   1. Access the site
   2. Establish safe perimeter
3. Deliver fencing to site and unload manually
   1. Establish area to accept delivery
   2. Drive vehicle to appropriate area
   3. Untie load if secured
   4. Unload goods manually
4. Installation of temporary fencing
   1. Carry temporary base to desired location
   2. Carry fence panel to desired location and insert into temporary base
   3. Tension nuts using a battery powered rattle gun
5. Delivery and unloading of mobile plant
   1. Direct delivery vehicle
   2. Release machine restraints
   3. Activate or place ramps in position
   4. Board the Machine
   5. Unload and drive machine to ground
   6. Moving or driving the machine
6. Safety check and operation of Excavator for site levelling, demolition and truck loading
   1. Safety check of unit.  Fill out Pre-trip/ Daily Inspection
   2. Boarding the machine
   3. Operating / traveling with or without a load
   4. Load the truck
   5. Backing up
7. Inspect and drive Tip Truck/ Dump Truck
   1. Pre-operation Inspection
   2. Board truck
   3. Start the truck
   4. Drive the truck
8. Cleaning up work area
   1. Pick up all off cuts / rubbish from work area
   2. Put all off cuts into bin or designated area provided on site
   3. Ensure work area is left clean and free of debris
9. Push Wheel Barrow on site
   1. Push wheel Barrow
   2. Tip the Wheel Barrow to empty

When you insert a template it automatically brings with it:

1. The main process step
2. The sub process steps associated in undertaking the task (Shown indented above)
   1. The potential hazards associated with undertaking the task (you can also delete or add any of these with a simple click)
   2. The Risk Rating for undertaking the task (You can also change this if you want to)
   3. The Hazard Control measure (you can also delete or add any of these with a simple click)
   4. The revised risk rating after applying the control (You can also change this if you want to)
   5. Any required PPE (you can also delete or add any of these with a simple click)
   6. Any applicable licences or qualifications required (you can also delete or add any of these with a simple click)
   7. Any pre operational inspections required (you can also delete or add any of these with a simple click)
   8. Any applicable legislation or codes of practice (you can also delete or add any of these with a simple click)