SWMS for Shelving and Racking are included in all versions of the JSEAsy Safety Software

Shelving and Racking Work Method Statements (SWMS)


People often ask, "Can I have a Safe Work Method Statements (SWMS) for Shelving and Racking Work?" "A document that covers everything?"  The answer is not really. Well you could create a document that covers most areas of Shelving and Racking work, but it would be hundreds of pages long and would contain more items that did not apply to your project, than items that did. 

A Safe Work Method Statements (SWMS) needs to document step by step how you are going to do a particular job. Not all jobs are the same! 

Are you going to install pallet racking or a sliding Compactus?

The steps in undertaking each of these tasks are very different. Not only are the steps different, but the potential hazards and the hazard control measures are very different as well.

The JSEAsy software builds your site specific SWMS for your Shelving and Racking job by adding templates of the steps you are going to take, in the order in which you are going to take them.

 

SWMS for installing a compactus unit are included in the JSEAsy EHS software
Installing Pallet Racking SWMS templates are included in the JSEAsy safety management software


Download a sample of a SWMS  generated from the JSEAsy software.

The JSEAsy software  comes preloaded with hundreds of templates (job steps) to build your site specific SWMS. 

All versions of the software also includes Safe Operating Procedures (SOP).

The JSEAsy Premium software is your total WHS management system.

The JSEAsy software comes preloaded with hundreds of templates (job steps).

Below is an example of templates you may insert into your site specific SWMS for Installation of Pallet Racking
  1. Site Orientation/ Induction
  2. Claim work area
  3. Safety inspection and use of Forklift
  4. Acceptance of delivery to site for materials
  5. Safety Check And Use Of Scissor Lift
  6. Mark Out Slab
  7. Assemble Frames and bolt together
  8. Tension nuts using a battery powered rattle gun
  9. Stand up pre-assembled rack frames
  10. Install horizontal racking beams from ground
  11. Install horizontal racking beams from a scissor lift
  12. Repeat the above process steps until completion of remaining bays
  13. Set up and use laser level
  14. Level racking and bolt to slab
  15. Cleaning up work area
  16. Monitoring and Review of SWMS

When you insert a template it automatically brings with it:

  1. The main process step
  2. The sub process steps associated in undertaking the task
    1. The potential hazards associated with undertaking the task (you can also delete or add any of these with a simple click)
    2. The Risk Rating for undertaking the task (You can also change this if you want to)
    3. The Hazard Control measure (you can also delete or add any of these with a simple click)
    4. The revised risk rating after applying the control (You can also change this if you want to)
    5. Any required PPE (you can also delete or add any of these with a simple click)
    6. Any applicable licences or qualifications required (you can also delete or add any of these with a simple click)
    7. Any pre operational inspections required (you can also delete or add any of these with a simple click)
    8. Any applicable legislation or codes of practice (you can also delete or add any of these with a simple click)

 

Site specific SWMS produced using the JSEAsy EHS software
Installation of Longspan shelving templates are also included in the JSEAsy WHS software
Hundreds of templates included - 1 low price - Exceptional value!

When you buy or rent the JSEAsy software, not only to get all of the templates specifically for paving work but you also get all of the templates for all of the other trades as well. Shelving and Racking contractors don't just install shelving! You will also benefit from many of the carpentry templates as well as structural and transport.

 

 


There is an example of a SWMS generated from the system available for download. 

The Main points in this example SWMS are templates that have been inserted into the “Site Specific SWMS” to build it.  

 See JSEAsy features and demonstrations for  video demonstrations on how this works 


 Process: Click the Links below to learn more about JSEAsy Software and the process. Opens in a NEW TAB / WINDOW)

 

Shelving Installation SWMS

View an InfoGraphic about How JSEAsy Software works    

    

View a JSEAsy System Flowchart    

 

When you buy or Rent JSEAsy v4.3 you have access to all of the SWMS templates, for all trades and industries.

Download the JSEAsy v4.4 SWMS template register.

This is a registers sorted by industry type and industry specific of all of the SWMS templates included in v4.4 of the JSEAsy Safety Management Software